Advertisement
NAME OF PARTS
Refer to figure 1 on page [1]
1. Control panel lid
2. Remote controller
3. Air outlet
4. Air inlet
5. Air filter (at air inlet)
MAINTENANCE
NOTE
• Do not use water or air of 120°F (50°C) or higher for
cleaning air filters and outside panels.
HOW TO CLEAN THE AIR FILTER
When the remote controller indicates Time to clean filter,
clean the air filter.
• The prompt will display after running for a certain time.
NOTE
• You may change the time of indication Time to clean filter.
If the unit is used in a space where the air is more con-
taminated, ask your local dealer for solution.
Contamination
Time until indication is displayed
Normal
2500 hours (equivalent to one year)
More contaminated
1250 hours (equivalent to a half year)
• If it becomes difficult to remove contamination from the air
filter, replace the air filter.
(Air filter for replacement is an optional accessory.)
1. Remove the air filter.
Pull out air filters toward you.
Refer to figure 2 on page [1]
1. Air filter
2. Clean the air filter.
Use a vacuum cleaner A) or wash the air filter with water
B).
A) Using a vacuum cleaner
B) Washing with water
To clean the air filter, wash with a soft bristle brush
and neutral detergent.
Remove water and dry in the shade.
3. Reset the air filter in place.
Place the air filter back to original position.
Insert it all the way.
3
4. Turn off the indication Time to clean fil t er displayed
on the remote controller after turning on the power.
• The indication can be turned off whether in operation or
stopped. Refer to the operation manual attached to the
remote controller.
HOW TO CLEAN AIR OUTLET AND OUTSIDE
PANELS
1. Clean with soft cloth.
2. When it is difficult to remove stains, use water or neutral
detergent.
WARNING
• Do not let the indoor unit get wet as it may cause an electric
shock or fire.
NOTE
• Do not use gasoline, benzene, thinner, polishing powder,
liquid insecticide. It may cause discoloring or warping.
REMOVAL AND INSTALLATION OF DISCHARGE
GRILL
Refer to figure 3 on page [1]
1. Lift the rear using the front as a fulcrum. To install
use the opposite method.
CLEANING THE DRAIN STRAINER
The drain strainer clears dirt in the drain water and prevents
the pipe from clogging. However, if the strainer mesh gets
clogged, water may overflow. Remove and wash the mesh
with water before and after seasons when the unit is in use
and once during those seasons.
1. Remove the drain strainer in the drip pan under
the drain pan and wash off any dirt that may have
accumulated.
Refer to figure 4 on page [1]
1. Drain pan
2. Drain strainer (take out)
3. Drip pan
2. Return the drain strainer to its previous position so
that the strainer does not leak water.
• Because cleaning requires removing the front panel,
contact the dealer where you bought the product.
3P086153-2L
English
Advertisement
