Table of Contents
Advertisement
7
silencer 1
8
silencer 2
silencer 1
9
10
silencer 2
11
sealing cap 1
12
sealing cap 2
The packed attachments should be subject to actual objects. If there are any alterations, there will
be no further notice.
3.2 Installation Site
(1) Make sure the hanging parts can hold the weight of unit.
(2) Water can be drained out from the drainage hose conveniently.
(3) No obstacles at outlet and inlets. Keep the air ventilation in good condition.
(4) Connect either left or right side of converter to outdoor unit for piping according to installation
space, as shown in the fig.3.1, the space used for maintenance should be ensured.
(5) Please keep the unit away from those positions where there's thermal sournce, inflammable gas
and smog.
(6) The unit is the cassette type (concealed type).
(7) Indoor unit, outdoor unit, mode exchanger power cord and connection cord should be kept 1m
(39-3/8in.) above away from TV and radio for preventing graphic interference and noise. (Even
the distance is 1m (39-3/8in.), if there's strong electric wave, there's still noise).
Cooling and Heating Recovery Mode Exchanger
4
The sizes of both nozzles
are IDΦ19.3 (3/4)and
ODΦ19(3/4)，nozzle
1
ODΦ19(3/4) is used for
connecting the high
pressure gas pipe of
VERDB02C432P.
The sizes of both nozzles
are IDΦ22.3(7/8) and
ODΦ28(1-1/8)，nozzle
1
OdΦ28(1-1/8) is used for
connecting the high
pressure gas pipe of
VERDB02C432P.
The sizes of both nozzles
are IDΦ22.3(7/8) and
Φ22(7/8)，nozzle Φ22(7/8)
1
is used for connecting the
high pressure gas pipe of
VERDB04C432P and
VERDB08C432P.
The sizes of both nozzles
are IDΦ28.3(1-1/8) and
Φ28(1-1/8)，nozzle
Φ28(1-1/8) is used for
1
connecting the low
pressure gas pipe of
VERDB04C432P and
VERDB08C432P.
Used for blocking the liquid
1
pipe nozzle
Used for blocking the high
pressure gas pipe nozzle of
VERDB02C432P, or used for
1
blocking the low pressure
gas pipe nozzle of
VERDB04C432P and
VERDB08C432P.
Advertisement
Table of Contents
