Advertisement
02
LEFT-SIDE STEERING WHEEL LEVER
Headlight functions are controlled using the left-side steering
wheel lever.
In AUTO mode, the vehicle will automatically monitor lighting con-
ditions and adjust headlight illumination accordingly, e.g. switch
from daytime running lights to low beam when the sun goes down
or when you drive into a tunnel. To switch on the Active High Beam
function, which automatically dims the headlights for approaching
vehicles, turn the lighting ring on the lever to
toward the steering wheel to activate manual high beams and
toward the dashboard to deactivate.
Active Bending Lights* are designed to follow the movement of
the steering wheel to help provide maximum illumination in turns
and intersections. The function is automatically activated when the
engine is started and can be deactivated in the center display's
Function view,
Approach lighting is activated when you unlock the vehicle using
the key and activates the exterior lighting and courtesy lighting to
help you approach the vehicle safely in the dark.
Home Safe Lighting illuminates some of the exterior lights after
the vehicle is locked to provide illumination around the vehicle in
dark conditions. To activate the function, switch off the ignition and
move the left-side steering wheel lever toward the dashboard and
release. The length of time home safe lighting remains illuminated
can be set in the center display.
Resetting the trip odometers
Reset all information in the manual trip odometer (TM) by pressing
and holding the RESET button. Press the button briefly to reset
only the mileage. The automatic trip odometer (TA) resets automat-
ically when the vehicle is switched off for more than 4 hours.
. Move the lever
.
Advertisement
