Advertisement
02
POWER* FRONT SEATS
Use the controls on the outside of the seat to adjust e.g. seat posi-
tion and lumbar support*. The two controls that together form the
shape of a seat are used to adjust the seat position. The third, the
multi-function control*, is used to adjust the comfort functions, e.g.
massage*.
The seat-shaped controls
Use the lower section of the control to adjust the height of the seat
cushion or move the entire seat. Use the rear section of the control
to adjust backrest tilt.
The multifunction control
Settings for massage*, side bolsters*, lumbar support* and seat
cushion extension* are adjusted using the multifunction control.
1. Turn the multifunction control upward/downward to open the
seat settings window in the center display.
3
2. Switch between the various functions in the center display by
turning the control upward/downward.
3. Adjust the setting of the selected function by pressing the upper/
lower/front/rear sections of the control.
Storing positions
1. Adjust the seat, door mirrors and head-up display* to the desired
positions and press the M button on the door panel. The indica-
tor light in the button will illuminate.
2. Press and hold down memory button 1 or 2 within three sec-
onds. An audible signal will sound and the indicator light in the M
button will go out.
To use your stored position:
With door open - press one of the memory buttons and release.
With door closed - press and hold one of the memory buttons until
the seat reaches the stored position.
3
On vehicles with four-way support*
Advertisement
