Nektar Panorama P1 Manual page 21

Transport Mode Launcher
Deleting Clips
You can also delete an already created clip. Press [Shift]+[Hit a pad] and use the same button
combination again, to create a new empty clip.
Another option is to activate [New Clip] and hit the pad corresponding to the clip you want deleted.
This method allows for multiple clips to be deleted.
Naming Clips
If you name your clips in Bitwig Studio's Clip Launcher Inspector Panel, Panorama will display the
name in the [Clips] page. The max length is between 7-9 characters depending on which characters
you choose.
Read more about the Inspector panel in the Bitwig Studio User Guide.
Scenes
You can trigger Scenes from Panorama using the pads.
With the [Launcher] menu active, press [Scenes]. This immediately assigns the pads to trigger scenes.
As with clips, the display graphic shows which scenes are assigned to each pad. Hit a pad to trigger a
scene.
Naming Scenes
If you name your scenes in Bitwig Studio, Panorama will display the name in the [Scenes] page. The
max length is between 7-9 characters depending on which characters you choose.
Accessing up to 144 Scenes
You can navigate up to 144 Scenes from Panorama. To access more Scenes, turn the [Data Control]
while the [Scenes] menu is active.
As you move the Data Control you can scroll through pages each containing 12 scenes with the
virtual pad display updating to show scene number and name (if applicable).
www.nektartech.com 21
Using Nektar Panorama P-Series with Bitwig Studio