Advertisement
Notes
Security
National safety regulations
Failure to comply with national safety regulations may result in personal injury and property
damage.
●
Note on installation
The surface-mounting housing can be used for fixed installations indoors and in dry loca-
tions.
Commissioning
Mounting
Fig. 1: Surface-mounting housing AP258E11
Process
1. Screw the surface-mounting housing into the ceiling using 2 Phillips screws
2. Pull the KNX cable through the mounting frame
3. Snap the mounting frame onto the mounting housing
Disposal
Smart Infrastructure
GAMMA instabus
Observe national provisions and comply with the appropriate safety regulations.
This symbol or any other national label indicate that the product, its
packaging, and, where applicable, any batteries may not be disposed of as
domestic waste. Delete all personal data and dispose of the item(s) at
separate collection and recycling facilities in accordance with local and
national legislation.
For additional details, refer to
CAUTION
Siemens information on
disposal.
3
A6V14046257_en--_a
2023-05-31
Advertisement
