Safety Precautions - Paragon HydraFLOW Installation, Operation And Maintenance Manual

Safety Precautions

For equipment covered specifically or indirectly in this instruction book, it is important that all personnel observe safety
precautions to minimize the chances of injury. Among many considerations, the following should be particularly noted:
• Rotating shafts can be dangerous. You can snag clothes, skin, hair, hands, etc. This can cause serious injury or death.
• Do not work under the vehicle when the engine is running.
• Do not work on the hydraulic system with the engine running or power take-off engaged.
• Do not engage or disengage driven equipment by hand from under the vehicle when the engine is running.
• PTO and driveshaft should have either a safety loop or guard installed.
• Install a support strap when servicing a drive shaft to prevent personal injury.
• Always use hose rated for hydraulic duty and at the correct pressure.
• A serious or fatal injury can occur...
if you fail to follow warning instructions.
-
if you lack proper training.
-
if you fail to follow proper installation and operating procedures.
-
if you do not use proper tools and safety equipment.
-
if you assemble hydraulic system components improperly.
-
if you use incompatible driveline components.
-
if you use worn out or damaged driveline components.
-
if you use driveline components in a non-approved application.
-
• This manual contains safety instructions. Read, understand, and follow this manual.
Get proper training.
-
Learn and follow safe operating procedures.
-
Use proper tools and safety equipment.
-
Use proper components in good condition.
-
Ensure connections exposed to the weather are sealing properly.
-
3