Set Up And Switch On Your Phone - Nokia TA-1576 Manual

Hide thumbs Also See for TA-1576:

Table of Contents

Nokia 130 (2023) Manual del usuario

Note: The pre-set security code is 12345. To switch on the security code, select Menu >

Settings > Security settings > Phone security , enter the code 12345 and select OK , and

then select On . To change the security code, select Menu > Settings > Security settings

> Change access codes > Change security code , enter the current security code and select

OK . Enter your new code (5-8 digits) and select OK , then enter the new code again and

select OK . When you change the code, you need to remember the new code, as HMD Global

is not able to open or bypass it.

Parts and connectors, magnetism

Do not connect to products that create an output signal, as this may damage the device. Do

not connect any voltage source to the audio connector. If you connect an external device

or headset, other than those approved for use with this device, to the audio connector, pay

special attention to volume levels.

Parts of the device are magnetic. Metallic materials may be attracted to the device. Do not

place credit cards or other magnetic stripe cards near the device for extended periods of time,

since the cards may be damaged.

SET UP AND SWITCH ON YOUR PHONE

Mini SIM

Important: This device is designed to be used with a mini SIM card only. Use of incompatible

SIM cards may damage the card or the device, and may corrupt data stored on the card.

Note: Switch the device off and disconnect the charger and any other device before removing

any covers. Avoid touching electronic components while changing any covers. Always store

and use the device with any covers attached.

Table of Contents

130