1. Manuals
  2. Brands
  3. Vixen Horns Manuals
  4. Horn
  5. VXO8580
  6. Installation manual

Vixen Horns VXO8580 Installation Manual

Hide thumbs
1
2
3
4
Table of Contents

Advertisement

Quick Links

Download this manual

BEFORE BEGINNING YOUR INSTALLATION

Read through the instruction guide before getting started with the installation. Professional installation is recommended for
this product.
CONTENTS
 2.5 Gallon Air Tank
 200 PSI Air Compressor
 240 PSI Air Pressure Gauge
 170-200 PSI Pressure Switch
 250 PSI Safety Valve
 Brass Drain Nut
 1/4" NPT Compression Fitting for 1/4" OD Air Line
 1/4" OD Nylon Plastic Hose (6 Feet)
 30A In-line Fuse
 Mounting Hardware
The specific voltage requirement for this on-board air system is 12 volt DC, therefore installation must be done to
a DC power source of 12 volts.

SAFETY INSTRUCTIONS

 Do not attempt to disassemble, repair or customize this product.
 Avoid setting up any parts of this product where there is a risk of falling off or risk of coming in contact with water.
 Avoid reaching out to touch or pick up any fallen or water submerged parts.
 Never leave this product unattended during use.
 Intended for use by adults only.
 During and immediately after use, avoid touching any part of the compressor with bare hands as it is very hot
during such periods.
 Avoid use of product near flames, explosive materials, aerosol products or oxygen devices.
 Be sure to pump nothing other than atmospheric air.
 It is important to determine the maximum air pressure for any tool or attachment before using it.
 Air sprayer or nozzle should always be pointed away from any part of the body.
PAGE 1 of 4
VXO8580
INSTALLATION GUIDE

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VXO8580 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Vixen Horns VXO8580

Summary of Contents for Vixen Horns VXO8580

  • Page 1 VXO8580 INSTALLATION GUIDE BEFORE BEGINNING YOUR INSTALLATION Read through the instruction guide before getting started with the installation. Professional installation is recommended for this product. CONTENTS  2.5 Gallon Air Tank  200 PSI Air Compressor  240 PSI Air Pressure Gauge ...
  • Page 2 VXO8580 INSTALLATION GUIDE  The compressor has Thermal Overload Protection, if this protection activates, cut off the source of power and let the unit cool down for about 30 minutes. This will reset the system and allow you to safely resume use of the air compressor.
  • Page 3 VXO8580 INSTALLATION GUIDE ELECTRICAL CONNECTION ON-BOARD AIR SYSTEM  The red wire of the on-board system coming from the pressure switch should be connected using the provided fuse to (+) 12-volt power source. IMPORTANT: To prevent the compressor from over running and possible damage due to an air leak, connect the compressor’s red wire to a power source in the vehicle that...
  • Page 4 VXO8580 INSTALLATION GUIDE MAINTENANCE  Make sure that electrical and fitting connections are regularly inspected, cleaned and tightened when needed.  Make sure mounting screws are regularly tightened if needed.  Drain weekly, to avoid excessive buildup of condensation.  Compressor features a washable air filter which should be cleaned using any mild form of liquid soap every two months if it gets dusty.

Table of Contents