Royal 583cx Instruction Manual page 29

Note
If you enter the wrong character, press the Void key to backspace and delete
that character and then continue.
To program your logo
1 Put the PRG key in the Mode key slot and turn it to the PRG position.
2 If you are prompted for a Manager Password, type the password number
3 For the 1st line, do the following:
4 If you want a 2nd line, do the following:
5 If you want a 3rd line, do the following:
6 If you want a 4th line, do the following:
7 If you want a 5th line, do the following:
8 When you are done, turn the Mode key to Off.
Alpha 583cx User's Guide
and then press the Check key. If you did not program a Manager
Password, go to the next step.
• Using the round Number keys area, press 31.
• Press the Return key. The Logo line 1 appears on the display.
• Enter the 1st line of the logo, up to 24 characters and then press the
Check key.
• Using the round Number keys area, press 32.
• Press the Return key. Logo line 2 appears on the display.
• Enter the 2nd line of the logo, up to 24 characters and then press the
Check key.
• Using the round Number keys area, press 33.
• Press the Return key. Logo line 3 appears on the display.
• Enter the 3rd line of the logo, up to 24 characters and then press the
Check key.
• Using the round Number keys area, press 34.
• Press the Return key. Logo line 4 appears on the display.
• Enter the 4th line of the logo, up to 24 characters and then press the
Check key.
• Using the round Number keys area, press 35.
• Press the Return key. Logo line 5 appears on the display.
• Enter the 5th line of the logo, up to 24 characters and then press the
Check key.
Setting Alphanumeric Descriptions
23