Running An Hourly Report - Royal 583cx Instruction Manual

To reset the Z2 counter
1 Put the PRG key in the Mode key slot and turn it to the PRG position.
2 If you are prompted for a Manager Password, type the password number
3 In the round Number keys area, press 2, then press the Z2 Counter
To reset the grand total
1 Put the PRG key in the Mode key slot and turn it to the PRG position.
2 If you are prompted for a Manager Password, type the password number
3 In the round Number keys area, press 777777 and press the Amount
To print a Department Range report
1 Put the PRG key in the Mode key slot and turn it to the X position.
2 If you are prompted for a Manager Password, type the password number
3 In the round Number keys area, press the Starting Department

Running an Hourly Report

The report shows the number of sales and the total sales amount for each
hour. All hours print, even if no sales were made in an hour. Times print
using a 24 hour format.
Important
An hourly reading must be closed out in the Z position.
To take an hourly report
1 Put the Z key or the PRG key in the Mode key slot and turn it to the X or
2 If you are prompted for a Manager Password, type the password number
3 In the round Number keys area, press 11 and the Amount Tend Total
Alpha 583cx User's Guide
and then press the Check key. If you did not program a Manager
Password, go to the next step.
starting number as 4 digits (for example 0001) and press the Return key.
and then press the Check key. If you did not program a Manager
Password, go to the next step.
Tend Total key. Enter the new amount (up to 12 digits) and press the
Non Tax key.
and then press the Check key. If you did not program a Manager
Password, go to the next step.
number as 2 digits (for example 01). Press the Ending Department
number as 2 digits and then press the Amount Tend Total key.
Z position.
and then press the Check key. If you did not program a Manager
Password, go to the next step.
key. The Hourly report prints.
Running Management Reports
79