Dynamic Range Control (DRC)
You can apply dynamic range control to
Dolby Digital tracks.
ON
•
range
OFF
•
adjustment
AUTO
•
automatically adjusted
» By default, the DRC mode is set
Note
•
IMAX
AUTO
•
OFF
•
» By default, the IMAX mode is set
Neural:X
virtual multi-channel virtual surround
volume.
ON
•
OFF
•
»
BASS/TREBLE
Change the low frequency (bass) and
high frequency (treble) settings of this
product.
BAS -5 ~ BAS +5
•
TRE -5 ~ TRE +5
•
»
to 0.
20 EN
Dialogue mode
Dialogue mode improves the clarity
programs and podcasts by adjusting the
tonal balance of this product.
DLG 0 ~ DLG 6
•
» By default, the dialogue mode is
set to 0.
Tips
•
cannot be adjusted.
SYNC
Set the audio delay.
longer than the time required to process
Audio Delay feature is designed to
remedy this delay.
S 00~S 200
•
» By default, the audio delay is set
to 00.
Calibration
Auto calibration setup.
Tips
•
If calibration is never done before, If MIC is
inserted, navigate to the calibration item shall
always display "CALIBRATE – PRESS PLAY".
To start auto calibration:
1
2
Insert MIC to MIC IN at the rear of
FB1.
» Display "CALIBRATE – PRESS PLAY"