Humanware explore 12 User Manual page 20

 Image overview (swipe two fingers up/down the middle of the screen
to zoom up to 1x)
 Toggle button selects Mountain icon for distance viewing and text
icon for close viewing, icons are displayed at the top left of the screen.
 Pan buttons (for zoom 4x or higher on folding stand only) displays
left and right arrows at the bottom of the screen to pan to the far left
or right of the camera's viewable area while magnifying a live image
• Auto-off (select how long the device remains on): 1 minute, 2 minutes, 5
minutes*, 10 minutes, Never.
• Preferred Zoom there are three modes to set preferred zoom. Users can
select the default zoom level when turning on the device, Previous (zoom
level at the time when the device was turned off), 2x* to 30x. 2x* to 15x in
Stand mode with Near camera. Note that you must restart the device
(power off, then back on) for any changes to take effect.
 Base and portable (change default zoom level in base or portable
modes)
 Support (change default zoom level in support mode)
 Distance (change default zoom level in distance mode)
• Contrast (submenu)
A variety of contrast color combinations are included to support users who
find these combinations most beneficial to their viewing needs.
 Preferred Contrast (start-up contrast): Previous* (last used
contrast), Color, or choice of enabled contrasts
 Menu (change menu colors): black on white*, white on black, black
on yellow, yellow on black, black on orange, orange on black, black
on cyan, cyan on black, black on purple, purple on black, black on
green, green on black, blue on yellow, yellow on blue, white on blue,
blue on white
Page 20