LG 50UQ9000PUD Service Manual
  1. Manuals
  2. Brands
  3. LG Manuals
  4. LED TV
  5. 50UQ9000PUD
  6. Service manual
LG 50UQ9000PUD Service Manual

LG 50UQ9000PUD Service Manual

Hide thumbs Also See for 50UQ9000PUD:

Advertisement

Table of Contents

LED TV
SERVICE MANUAL
CHASSIS : UA13D
MODEL : 50UQ9000PUD
MODEL :
CAUTION
BEFORE SERVICING THE CHASSIS, READ THE SAFETY PRECAUTIONS IN THIS MANUAL.
P/NO : MFL71912202 (2202-REV00)
Any reproduction, duplication, distribution (including by way of email, facsimile or other electronic means),
publication, modification, copying or transmission of this Service Manual is STRICTLY PROHIBITED unless you
have obtained the prior written consent of the LG Electronics entity from which you received this Service Manual.
The material covered by this prohibition includes, without limitation, any text, graphics or logos in this Service
Manual.
Copyright © 2022 LG Electronics Inc. All rights reserved. Only training and service purposes.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 50UQ9000PUD and is the answer not in the manual?

Questions and answers

Related Manuals for LG 50UQ9000PUD

Summary of Contents for LG 50UQ9000PUD

  • Page 1 Service Manual is STRICTLY PROHIBITED unless you have obtained the prior written consent of the LG Electronics entity from which you received this Service Manual. The material covered by this prohibition includes, without limitation, any text, graphics or logos in this Service Manual.
  • Page 2 SOFTWARE UPDATE ................10 BLOCK DIAGRAM ................. 12 EXPLODED VIEW .................. 13 ASSEMBLY / DISASSEMBLY GUIDE ........... 14 TROUBLE SHOOTING GUIDE ..........APPENDIX - 2 - Copyright © LG Electronics Inc. All rights reserved. Only for training and service purposes.

  • Page 3: Safety Precautions

    When the exposed metal has no return path to the chassis the reading must be infinite. An other abnormality exists that must be corrected before the receiver is returned to the customer. - 3 - Copyright © LG Electronics Inc. All rights reserved. Only for training and service purposes.

  • Page 4: Servicing Precautions

    - 4 - Copyright © LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 5 1. Clip each fuse or resistor lead at top of the circuit board hollow stake. 2. Securely crimp the leads of replacement component around notch at stake top. - 5 - Copyright © LG Electronics Inc. All rights reserved. Only for training and service purposes.

  • Page 6: Specification

    PC / DTV format Support 6Gbps SPDIF out Optical Audio out Rear (1EA) USB Input EMF, DivX HD, For SVC (download) JPEG, MP3, DivX HD - 6 - Copyright © LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 7 DeepColor is On 2560*1440 88.78 59.95 241.5 (UHD, 8K 120Hz models only), Support only when 2560*1440 182.99 119.99 497.7 UHD DeepColor is On - 7 - Copyright © LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 8 UDTV 2160P Not Support for FHD. 4096*2160 134.86 59.94 593.4 UDTV 2160P Not Support for FHD. 4096*2160 UDTV 2160P Not Support for FHD. - 8 - Copyright © LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 9 8K Model Only. 7680*4320 1188 8K Model Only. 7680*4320 2376 8K Model Only. 7680*4320 263.74 59.94 2376 8K Model Only. 7680*4320 2376 8K Model Only. - 9 - Copyright © LG Electronics Inc. All rights reserved. Only for training and service purposes.

  • Page 10: Software Update

    (6) After finishing the update, it will show a pop-up below the picture (7) Click “Yes” : Tv will be turn off and on itself - 10 - Copyright © LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 11 [Close] : Close the pop-up (4) If it needs to cancel the update, click “cancel update” button (5) [“No”] : update continue [“Yes”] : update cancel - 11 - Copyright © LG Electronics Inc. All rights reserved. Only for training and service purposes.

  • Page 12: Block Diagram

    BLOCK DIAGRAM - 12 - Copyright © LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 13 It is essential that these special safety parts should be replaced with the same components as recommended in this manual to prevent Shock, Fire, or other Hazards. Do not modify the original design without permission of manufacturer. - 13 - Copyright © LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 14 *SCREW TORQUE : 5 ~ 7Kgf.cm *CAUTION : Before lifting B/C, Screw and Latch must be disassembled first. *Screw Spec. Screw 12 Points M3*5.5 M4*10 - 14 - Copyright © LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 15 ⓐ ⓐ ⓐ ⓑ ⓑ Step2) Upper Right(Left) Side Step1) Lower Right(Left) Side PUSH PUSH Latch Push Latch Push PULL PULL Pull Pull - 15 - Copyright © LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 16 * Caution : Latch can be separated on the top position, don’t pull it hard for upward Latch Position ⓐ ⓐ ⓐ ⓐ - Latchⓐ : 6 Points - Latchⓑ : 2 Points ⓑ ⓐ ⓐ ⓑ - 16 - Copyright © LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 17 - Latchⓐ : 6 Points - Latchⓑ : 2 Points ⓑ ⓐ ⓐ ⓑ • Press direction - Oblique direction from the outer surface - 17 - Copyright © LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 18 If the latch is nor properly assembled, press the area again (3) Assemble the screws. (12ea) *Screw Spec. M3*5.5 Screw 12 Points M4*10 - 18 - Copyright © LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 19 (2) Disassemble SPCB Cover shield screws 5ea. (Use General Screw Driver) (3) Disassemble the screw, and then move each SPCB cover field L/R upward to disassemble it. - 19 - Copyright © LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 20 (5) Disassemble 6screws on the lower side of the C/top - Screw Spec: M3*8 (Silver) - Driver : Normal size screw TIP Driver is available. - 20 - Copyright © LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 21 (Case Top down Screw already released, so be caution Case top down falling when Reverse LCM) (8) Case Top Down release - Disassembly horizontally side direction - 21 - Copyright © LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 22 After Releasing Guide Panel all rounded hook, Remove Guide Panel-Board assy with UP Direction UP : 8ea Left : 4ea Right : 4ea Down : 6ea Hook - 22 - Copyright © LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 23 - As the reflector hole is fixed to the lens, disassemble the reflector by release the the fixation of lens from the end on the right. a fixed part a fixed part - 23 - Copyright © LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 24 (15) Assembly of the Led array connector- Attach the connector on the wire ass’y by pushing it upward and downward. (16) Attach the reflector sheet. - Check Down side Sheet hanger position. Check the down shape - 24 - Copyright © LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 25 - Assemble the sheet shape (Chamfer) on the front left side of the SET. Diffuser Plate: Chamfer Diffuser Plate 1ea Sheet: Chamfer Sheet 1ea SET Front Direction Left down Chamfer - 25 - Copyright © LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 26 - Screw Spec: M3*8 (Silver) - Driver : M3 Screw Module Driver available. * Caution : While Screw assembly, be care SPCB COF damage from driver Tip. - 26 - Copyright © LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 27 - Screw Spec : M2*4.0mm Tapping Screw(BLACK) - Location : Up(5ea)/Left(3ea)/Right(3ea) - Driver : Normal size screw TIP Driver is available. LEFT RIGHT Guide Panel Back Screw point - 27 - Copyright © LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 28 (26) Assembly SPCB Cover shield to Cover Bottom. (27) Assemble SPCB Cover shield screws 5ea. (Use M3 Screw module Driver) FINISH - 28 - Copyright © LG Electronics Inc. All rights reserved. Only for training and service purposes.

  • Page 29: Troubleshooting Guide

    TROUBLE SHOOTING GUIDE Copyright © 2022 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 30 E. Noise Circuit noise, mechanical noise F. Exterior error Exterior defect First of all, Check whether there is SVC Bulletin in GSCS System for these model. Copyright © 2022 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 31 ☞A4 & A2 Always check & record S/W Version and White Replace Main Board Re-enter White Balance value Balance value before replacing the Main Board Copyright © 2022 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 32 ☞A18 Check various Check and No Video/ Normal voltages of Power replace No audio voltage? Board (13.2V…) MAIN B/D Replace Power Board and repair parts Copyright © 2022 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 33 1. Reconnection 2. Install Booster S/W Upgrade Contact with signal distributor Normal or broadcaster (Cable or Air) Picture? Normal Picture? Replace Main B/D Close Close Copyright © 2022 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 34 Replace Main/T-con B/D error cable normal Request repair for external device/cable Check external External HDMI device and Replace Main/T-con B/D device/ Cable error cable normal Copyright © 2022 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 35 Replace screen? HDMI/ Screen (Check normal operation of Main /T-con normal? External Input, Component, RGB and HDMI/DVI by connecting Jig, pattern Generator ,Set-top Box etc. Copyright © 2022 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 36 Measure voltage of each output of Power B/D Normal? Normal Replace Main B/D voltage? Normal Check ST-BY 7.8V Close voltage? ☞A18 Replace Power B/D Replace Power Copyright © 2022 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 37 Replace Main B/D Normal? Abnormal Check for all phase Replace Power B/D Abnormal power out Fix A/C cord & Outlet and check each phase out Copyright © 2022 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 38 Reboot by SW down load function UNKNOWN No meaning (same as initial value) COMP_END OLED threshold voltage degradation(Compensation) completes. PNWASHDONE Power off by panel noise wash function complited. (OLED) Copyright © 2022 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 39 Power Board Screen normal voltage Speaker off Cancel OFF Replace Power Board and repair parts Check Replace MAIN Board Disconnection Speaker disconnection Replace Speaker Copyright © 2022 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 40 (In case of Connect and check Normal External Input other external audio? signal error) device Check and fix external device Check and fix external device Copyright © 2022 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 41 Replace Main B/D (Power B/D don’t have problem) If R/C operate, Normal Close operating? Explain the customer cause is interference from light in room. Replace R/C Copyright © 2022 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 42 “00.00”? Replace MR22 Close Change the RF Receiver assy Or RF Receiver Cable * If you conduct the loop at 3times, change the MR22. Copyright © 2022 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 43 Voltage? Main B/D INSTART menu “NG”? ☞A24 Close Check & Repair Wifi cable connection ☞A4 Wi-Fi Mac value Close is “NG”? Change the Wifi assy Copyright © 2022 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 44 Recognition error - S/W Version HDMI/ DVI, Optical Check and fix Replace Main B/D Fix in Recognition external device/cable accordance error with technical information Copyright © 2022 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 45 “Part related to nose” in the Owner’s then proceed as shown in the solution manual Manual. (For models without any fix information, provide the description) Copyright © 2022 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 46 Revised date Module Zoom part with Replace module damage exterior damage Cabinet Replace cabinet damage Remote control Replace remote control damage Stand Replace stand dent Copyright © 2022 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 47 Exchange Module (1) ~ (3) Inverter/ Module A-8/11 A-9/11 ~ Only using Exchange T-Con (1) ~ (2) T-con model A-10/11 Exchange Power Board(PSU) A-11/11 Continue to the next page Copyright © 2022 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 48 Motion Remote operation checking method How to use the Service remote control A24-A26 E. Etc Check items after Main B/D replacement Adjustment Test pattern - ADJ Key Copyright © 2022 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 49 Content date All Models After turning on the power and disassembling the case, check with the naked eye, whether you can see light from locations. Copyright © 2022 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 50 2. Enter into White Balance. 3. After recording the R, G, B (GAIN, Cut) value of Color Temp( Cool/Medium/Warm), re-enter the value after replacing the MAIN BOARD. Copyright © 2022 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 51 All Setting  General  Programmes  Programme Tuning & Settings  Manual Tuning When the signal is strong, use the attenuator (-10dB, -15dB, -20dB etc.) Copyright © 2022 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 52 Content Version checking method date <ALL MODELS> 1. Checking method for remote control for adjustment Version Press the IN-START with the remote control for adjustment. Copyright © 2022 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 53 1. Check the signal strength or check whether the screen is normal when the external device is connected. 2. After measuring each voltage from power supply, finally replace the MAIN BOARD. Copyright © 2022 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 54 Revised Content connection diagram date <ALL MODELS> As the part connecting to the external input, check the screen condition by signal Copyright © 2022 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 55 A. Video error_Color error symptom date Revised Content Check Link Cable(Vx1/EPI/CEDS) reconnection condition date Check the contact condition of the Link Cable, especially dust or mis insertion. Copyright © 2022 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 56 CABLE Screen darkness disconnection of the FFC cable pin. G color transient due to poor FFC cable CABLE G Color Excessive connection A - 1/11 Copyright © 2022 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 57 CABLE Color spread FFC connection problem CABLE Color spread FFC connection problem Due to foreign substance within CABLE Screen stop FFC PIN A - 2/11 Copyright © 2022 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 58 Main IC problem Main Dark picture Dark left-side screen Top/bottom screen part Main Broken picture Picture problem due to tuner Inner side quality problem A - 3/11 Copyright © 2022 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 59 Screen spread Screen corner appears blurry Main Color Spread Color spread on the screen Main Blurry Screen Blurry picture on the screen A - 4/11 Copyright © 2022 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 60 Screen picture spread problem Screen problem No problem at the initial stage. Right-side picture Main During Heat run, right-side picture problem problem A - 5/11 Copyright © 2022 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 61 BLU internal foreign matter inflow MODULE Internal matter 6 block image broken MODULE Image broken MODULE Image broken Screen sync signal broken A - 6/11 Copyright © 2022 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 62 BLU Vertical spreading on cube screen in no MODULE Vertical smear signal MODULE Over color Screen contour part brightly Over color A - 7/11 Copyright © 2022 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 63 Center of the screen 1 block dark MODULE Screen darkness MODULE Vertical bar Center Vertical Bar Darkness at the MODULE bottom of the MODULE internal BLU breakage screen A - 8/11 Copyright © 2022 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 64 T-Con is defective and the picture below T-CON image broken the screen is broken A - 9/11 Copyright © 2022 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 65 The entire screen is dark and bit noise T-CON Image Broken occurs The entire screen is dark and bit noise T-CON Image Broken occurs A - 10/11 Copyright © 2022 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 66 Appendix : Exchange Power Board (PSU) No Light No picture/Sound Ok A - 11/11 Copyright © 2022 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 67 Established B. Power error _No power symptom date Revised Content Check front Power Indicator date ST-BY condition: On or Off Power ON condition: Turn Off Copyright © 2022 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 68 SK100 (AC input) 97.2V 118.8V ※ Depending on Model Power Board is different. All condition meets, Power Board OK. But Interface(P801, P201) and Spec is same Copyright © 2022 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 69 <ALL MODELS> RELEASE Entry method 1. Press the IN-START button of the remote control for adjustment. 2. Check the entry into adjustment item 3. Copyright © 2022 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 70 1. Press the Setting button on the remote control. 2. Select the Sound function of the Menu. 3. Select the Sound Out. 4. Select TV Speaker. Copyright © 2022 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 71 3. Connect the tester RX1 to the speaker terminal and if you hear the Chik Chik sound when you touch the GND and output terminal, the speaker is normal. Copyright © 2022 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 72 2. Check the standby 3.5V on the terminal 22 pin. (③) 3. AS checking the Pre-Amp(IR LED light), the power is in ON condition, an Analog Tester needle should move slowly, otherwise, it’s defective. Copyright © 2022 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 73 MIC_CLK 1. Check BT/Wifi cable condition between BT/Wifi assy & Main board.( Check ① and ②) 2. Check the 3.5V on the terminal 1. (③) Copyright © 2022 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 74 Standard Repair Process Detail Technical Manual Error Established E. Etc symptom date Revised Content How to use the Service remote control date 1. How to access the remote control RELEASE Copyright © 2022 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 75 Digital EYE function ON/OFF For some Model, access to the Test Pattern TILT Used for screen tilting change (Access to the old PDP control mode) Copyright © 2022 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 76 Connects to external input 1,2,3 COMP1,2 (Added function) Connects to Component 1,2 HDMI1,2,3,4 Connects to HDMI 1,2,3,4 (Add function) DVI (Add function) Connects to DVI Copyright © 2022 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 77 - Record the R, G, B (GAIN, Cut) value of the color temperature before main board replacement. After replacing the main board, key in the recorded value. Copyright © 2022 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 78 You can view 9 types of patterns using the ADJ Key Checking item : 1. Defective pixel 2. Residual image 3. MODULE error (ADD-BAR,SCAN BAR..) 4.Video error (Classification of MODULE or Main-B/D!) Copyright © 2022 LG Electronics Inc. All rights reserved. Only for training and service purposes.

Table of Contents