Advertisement
protective sheet from the pad, do not
touch the adhesive side.
Press the suction cup of the mounting
device against the pad (2B). Turn the
catch on the mounting device to the
desired position (2C). Rotate the ring
on the mounting device clockwise
(2D) to create a vacuum between the
suction cup and the pad.
To detach the suction cup from the
pad, proceed in the same way as when
you detach the cup from a windscreen
(7, 8, and 9).
Place or remove the mobile device
Do not place or remove a mobile
device while driving.
To place your device into the holder,
insert the device into the holder (3),
hold the device, and push the arm (4)
to lock the device firmly in place. To
Attach the holder to the
mounting device
To attach the mobile holder to the
mounting device, insert the catch on
the mounting device into the slot at
the back of the holder (2E). Rotate the
holder clockwise about 90 degrees
until it locks into place (2F). Make sure
the mounting device is firmly
attached (2G).
To detach the holder from the
mounting device, rotate it
anticlockwise.
charge the battery of your device, use
a compatible charger.
To remove the device, hold the device
to prevent it from dropping, push the
release button (5), and pull the device
out from the holder (6).
ENGLISH
Advertisement
