Table of Contents
Advertisement
Installing your Dual Fuel Range Cooker
Bringing it all together
Connections
Electrical
• IMPORTANT: Electrical connections must
be carried out by a suitably qualified
person and in accordance with all
relevant local building and installation
regulations.
1. See the rating label at the rear of the product for the
appliance's load rating.
2. The cooker must be connected to a dedicated
circuit suitably rated for the load of the appliance (see
rating label at rear of appliance) as shown in the wiring
diagrams below. It must be connected via a suitably
rated cable to a double pole isolator cooker switch also
suitably rated for the appliance.
3. The electrical cable should not touch the hot
parts of the appliance.
The electrical cable (not supplied) should not be
routed through any area that may be affected by
heat from the oven, especially the area directly
behind the oven.
or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 01759 487838.
Gas
This appliance must be installed by a suitably
qualified gas safe registered gas installer to
standard BS 6172: 2010
! Failure to do this
will invalidate your warranty
Fixing to the wall
Before using the appliance fix it securely to the wall
using the chains on the back of the cooker. This will
prevent the cooker from toppling forward if excess
weight is placed on the oven door. Since the chains
must be attached to wall fixings suitable for your wall
type, the wall fixings are not supplied with the cooker
(Figure 4).
Installing your Dual Fuel Range Cooker
Figure 4
12
Advertisement
Table of Contents
