Step 3.
Paste the camera assembly mylar.
Figure 25. Paste camera mylar
Remove the hinges
Make sure the following FRUs (or CRUs) have been removed.
"Remove the LCD bezel" on page 39
"Remove the LCD panel" on page 40
Step 1.
Remove the screws.
Table 13. Screw specifications — removing the hinges and the WLAN antennas
Screw
Number
location
hinges
6
to LCD
base
cover
Step 2.
Remove the hinges.
Refer to Appendix B "Lenovo part numbers for replacement FRUs" on page 47 to look up the Lenovo part
numbers for the replacement hinges.
44
Hardware Maintenance Manual
Specifications
M2.5 × 3.5 mm, flat-head, nylon-coated
Color
Silver