Figure 4. Detach from the upper edge
Attention: Do not pull up the upper case before detaching the keyboard and touch pad cables.
Otherwise the cables may be damaged.
Step 4.
Open the keyboard and touch pad sockets, detach the cables, and pull up the upper case.
Refer to Table 15 "Part numbers for FRUs (CRUs)" on page 47 to look up the Lenovo part numbers for the
following replacement parts:
Upper case
The ROM write-protection screw can be removed after removing the upper case.
Figure 5. Location of the ROM write-protection screw
Remove the battery pack
Make sure the following FRUs (or CRUs) have been removed.
"Remove the upper case (with keyboard)" on page 32
Step 1.
Unplug the battery cable from the system board and take the cable out of the cable guiders.
Attention: Use your fingernail to pull the connector to unplug it. Do not pull the cable itself.
Step 2.
Remove the screws and take out the battery pack.
.
Chapter 5
Removing a FRU or CRU
33