Table of Contents
Advertisement
Extending the Drainage Tube
♦
The drainage tube can also be extended using
a tube of a similar diameter (18mm) and an
appropriate connector, as shown in the illustration
below.
Original Tube
Self-Diagnosis
♦
This unit is equipped with a self-diagnose feature,
which warns you of any errors or malfunctions
it finds in the course of its normal operation.
Any errors the unit finds when running its self-
diagnose will be represented by the words 'E1' or
'E2' appearing on the display panel.
♦
Should any malfunction occur, please seek out
a specialised technician or contact our customer
support team.
Cleaning and maintenance
WARNING: Before cleaning and maintenance,
switch the appliance off and remove the plug from
the socket, to prevent electric shock.
Note! Always unplug the unit from the mains before
cleaning.
Note! Clean the unit regularly to ensure optimal
performance.
Cleaning the Housing
♦
To clean the unit's housing, wipe it down with a
soft, damp cloth.
♦
Never use aggressive chemicals, gasoline,
detergents, chemically treated cloths or other
cleaning solutions to clean the unit, as this may
cause damage to its components.
Cleaning the Filter
♦
To clean the filter, tap it lightly or use a vacuum
cleaner to remove loose dust and dirt from its
surface.
♦
Once it is dust and dirt-free, rinse the filter
thoroughly under running water, at a temperature
of no more than 40 degrees centigrade.
♦
Dry the filter thoroughly before placing it back into
the unit.
Note! NEVER attempt to operate the unit without the
filters.
Before storing the unit:
Extension Tube
♦
Drain any water inside the tank.
♦
Operate the unit in ventilation only mode for a few
hours to thoroughly dry the interior.
♦
Clean or change the filter.
♦
Unplug and store the power cord.
♦
Place the unit back into its original box.
♦
You can now safely store the unit.
Mains plug replacement
If a new mains plug needs to be fitted:
♦
Safely dispose of the old plug.
♦
Connect the brown lead to the live terminal in the
new plug.
♦
Connect the blue lead to the neutral terminal.
♦
If the product is class I (earthed), connect the
green/yellow lead to the earth terminal.
Note! If your product is class II double insulated
(only 2 wires in the cord set), no connection is to be
made to the earth terminal.
Follow the fitting instructions supplied with good
quality plugs. Any replacement fuse must be of the
same rating as the original fuse supplied with the
product.
WARNING: The above section on mains plug
replacement is for authorized service centre
persons.
(Original instructions)
ENGLISH
13
Advertisement
Table of Contents
