Flair ZARA 3FT Assembly Instructions Manual

IMPORTANT – READ CAREFULLY – RETAIN THESE INSTRUCTION FOR FUTURE REFERENCE.
PLEASE READ this sheet prior to assembly to familiarize yourself with the various stage of construction. Do Not
destroy any of the packing until you are certain that you have all the necessary parts for assembly.
CAUTION: There are small components used in the construction of this unit. These loose items should be kept away
from young children whilst assembling your unit to avoid the danger of choking hazards.
INFORMATION:

Due to the size of this product, we recommend that is assembled in the room intended for use.

When you are ready to start, make sure that you have the right tools, plenty of space and clean, dry area for
assembly.

Unwrap all packaging materials and place each component on top of the carton box or on a clean floor to prevent
from scratching.

Check the pack and make sure you have all the parts listed.

Tools are not included unless specified in the parts list.

Ensure that this product is fully assembled as illustrated before use.

Please keep the assembly instruction for future reference.

If for any reason you need to return this item, you must return in original packaging. Please be note that assembled
items cannot be returned.
WARNING:

Always follow the manufacturer's instruction.

Always lift the bed with two people to reposition.

This product should only be used on firm, level ground.

If this bed is placed on a non-carpeted floor, you must place some protection under all legs to stop the bed frame
from moving. If this is not adhered to there is no guarantee if the bed frame collapses.

Keep small parts out of reach of children.

Do Not use power tools to construct this product.

Do Not tighten screw until the product is fully assembled.

Do Not exposed this product to dripping or splashing, rain or areas with heavy moisture.

Do Not place this product in direct sunlight, open flames such as candles or heat, such as radiators. Keep away from
temperature over 35°c.

DO NOT push the bed frame as this will damage the legs.

Ensure all screws or bolts are tighten and inspect regularly.
CARE INFORMATION

Never use scoured, abrasives or chemical cleaners.

To clean wipe with a damp sponge and warm soapy water. Do Not use solvent-based cleaners or detergents as they
can bleach or damage the product.
ASSEMBLY INSTRUCTIONS
ZARA 4POSTER BED 3FT
Product Dimension:
W980*L2000*H2000MM
Page 1 of 8