Toro StreamLine 20353 Operator's Manual page 16

Figure 23
1. Operating position
3. Insert the carriage bolt (with the bolt head toward
the inside) through the handle bracket and the
upper hole in the handle end. Ensure that the
square edges of each carriage bolt fits into the
upper or lower square hole in its related handle
bracket (Figure 24).
Figure 24
1. Handle knob
4. Loosely install the handle knobs and carriage
bolts on the handle brackets.
5. To unfold the handle, refer to
Unfolding the Handle (page
g032870
2. Folded position
g032865
2. Carriage bolt
1 Assembling and
4).
16