Nevir NVR-4354 DD Instructions For Use Manual page 19

HOW TO OPERATE THE REFRIGERATOR COMPARTMENT
Switching on the appliance
Starting up the appliance
The appliance features internal controls.
Plug in the appliance.
When the appliance is connected to the mains, the inside light switches on
each time the door is opened. The thermostat, located inside the refrigerator
compartment, is used to adjust the temperature of both the refrigerator
compartment and low temperature compartment (if fitted).
Appliance temperature adjustment:
Temperature setting:
The thermostat is used to automatically adjust the internal temperature of
the refrigerator compartment and the or compartment..
The thermostat knob can be turned
from position 1 to 7 (coldest setting)
to make the internal temperature
colder.
When set to O the appliance is switched off.
To store food for a short period of time, set the thermostat between
1 (Min) and 3 (Med).
- To store food for long periods of
time in the compartment, set the
thermostat to 3 or 4.
Note:
To guarantee correct operation with ambient temperatures below
16°C, press the button located near the thermostat (if provided).
Press the button again to turn this off with higher ambient
Temperatures (above 16°C).
The ambient air temperature,
frequency of door opening and the
position of the appliance can
affect internal temperatures. These
factors must be taken into account
when setting the thermostat.
19