Table of Contents
Advertisement
When you select the "PERIPHERAL SETUP" on the main program, the screen display will
appears as:
Peripheral Setup Screen
© 2001 American Megatrends, Inc. All Rights Reserved
OnBoard Serial Port 1
OnBoard Serial Port 2
OnBoard Parallel Port
Parallel Port Mode
Parallel Port DMA Channel
Parallel Port I RQ
OnBoard IDE
Peripheral Setup options are displayed by choosing the Peripheral Setup icon from the WINBIOS
Setup main menu. All Peripheral Setup options are described in this section.
Onboard Serial Port1: This option enables serial port 1 on the motherboard and specifies the
base I/O port address for serial port 1. The settings are 3F8h, 3E8h, or Disabled. The Optimal
default setting is 3F8h. The Fail-Safe default setting is Disabled.
Onboard Serial Port2: This option enables serial port 2 on the motherboard and specifies the
base I/O port address for serial port 2. The settings are 2F8h, 2E8h, or Disabled. The Optimal
default setting is 2F8h. The Fail-Safe default setting is Disabled.
Onboard Parallel Port: This option enables the parallel port on the motherboard and specifies
the parallel port base I/O port address. The settings are 378h, 278h, or Disabled. The Optimal
default setting is 378h. The Fail-Safe default setting is Disabled.
AMIBIOS SETUP – PERIPHERAL SETUP
3F8/COM1
2F8/COM2
378
Normal
N/A
7
Both
~ 34 ~
AMI BIOS SETUP
Available Options:
Auto
4Disabled
378
278
3BC
↑↓ : Sel
ESC : Exit
PgUp/PgDn : Modify
F1:Help
F2/F3 : Color
Advertisement
Table of Contents
