Lanner electronics EM-561 Series User Manual page 42

Date Alarm
Time Alarm
Note: If you have change the setting, you must let the system boot up until it goes to the
operating system, before this function will work.
Reload Global Timer Events : When Enabled, an event occurring on each device listed below
restarts the global time for Standby mode.
Primary IDE 0
Primary IDE 1
Secondary IDE 0
Secondary IDE 1
FDD, COM, LPT Port
PCI PIRQ [A-D] #
After you have made your selection in the POWER MANAGEMENT SETUP, press the <ESC> key
to go back to the main program screen.
You can choose which month the system will boot up.
Set to 0, to boot every day.
You can choose what hour, minute and second the
system will boot up.
Page: 38