1. Manuals
  2. Brands
  3. Newgrind Manuals
  4. Grinder
  5. Rhino RXL1000
  6. Operator's manual

Newgrind RHINO RXL1000 Operator's Manual

Hide thumbs Also See for RHINO RXL1000:
Table of Contents

Advertisement

Quick Links

Download this manual
resurfacing machine
operator's Manual
LENZE VFD i550 protec IP31 / NEMA 1, NEMA 4X outdoor
equipment usages
• Concrete leveling, grinding and polishing
• Glue, thinset and mastic removal
• Terrazzo grinding and polishing
• Stone grinding and polishing
• Hardwood sanding and refinishing
For your personal safety, READ and UNDERSTAND before using.
!
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RHINO RXL1000 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Newgrind RHINO RXL1000

Summary of Contents for Newgrind RHINO RXL1000

  • Page 1: Equipment Uses

    resurfacing machine operator's Manual LENZE VFD i550 protec IP31 / NEMA 1, NEMA 4X outdoor equipment usages • Concrete leveling, grinding and polishing • Glue, thinset and mastic removal • Terrazzo grinding and polishing • Stone grinding and polishing • Hardwood sanding and refinishing For your personal safety, READ and UNDERSTAND before using.

  • Page 2: Table Of Contents

    Rhino RXL1000 user Manual Table of Contents EQUIPMENT USES....................RXL1000 DIAGRAM ..................... RXL1000 BASE INTERIOR VIEW ................MACHINE SPECIFICATIONS ................. Tooling ......................Average Production Rates................SAFETY INSTRUCTIONS ..................Work Area Safety ..................Electrical Safety ................... Personal Safety ..................... Equipment Use and Care ................

  • Page 3: Rxl1000 Diagram

    Rhino RXL1000 diagram FORWARD SPIN BUTTON STOP BUTTON REVERSE SPIN BUTTON FORWARD DRIVE LEVER (UNDERSIDE) REVERSE DRIVE LEVER VARIABLE SPEED HAND GRIPS ADJUSTMENT POTENTIOMETER VACUUM CONNECTOR PORT VELCRO STRAPS FOR MULTI ARTICULATING HANDLE POWER CABLE AND VACUUM HOSE VARIABLE FREQUENCY DRIVE...

  • Page 4: Rxl1000 Base Interior View

    Rhino RXL1000 bASE INTERIOR VIEW MAIN DRIVE SPROCKET QUICK-CHANGE DRIVE BELT IDLER SPROCKETS X 2 SECONDRY DRIVE SPROCKETS X 5 COUNTER-CLOCKWISE SPINNING RHINO TOOL PLATES (RED) - BOTTOM VIEW SINGLE OR DOUBLE GROMMET TOOL PLATE MOUNTING SYSTEM CLOCKWISE SPINNING RHINO TOOL PLATES...

  • Page 5: Machine Specifications

    Rhino RXL1000 machine specifications POWER 50 AMP/208-230V 3 Phase MAXIMUM WATTS DRAW 12500 WATTS SELF PROPELLED FORWARD AND REVERSE 24 VOLT TRANSAXLE MACHINE WEIGHT 1200 lbs BIASED WEIGHT KIT MAX WEIGHT 600 lbs COMBINED WEIGHT 1800 lbs DISC SPEED 200 - 1200 RPM...

  • Page 6: Safety Instructions

    Rhino RXL1000 specifications MODEL X4C20200C Input Power 200 - 230V +/- 15% 50/60Hz 3 PHASE Amps 50 A Plug Type HUBBEL 50AMP 250V 3PH TWISTLOCK Disc Diameter 11" / 279mm Disc Speed (RPM 200 - 1200 Machine Width 32" / 812mm...

  • Page 7: Equipment Use And Care

    Rhino RXL1000 safety instructions continued 10. Use safety equipment. Always wear eye protection. Dust mask, non-skid safety shoes, hard hat, or hearing protection must be used for appropriate conditions. Ordinary eye or sunglasses are NOT eye protection. 11. DO NOT turn on equipment while the machine is tilted back. Any tooling fastened to the machine can come off and cause damage or injury.

  • Page 8: Machine Operation

    Rhino RXL1000 safety instructions continued 2. Always use safety glasses or goggles. Ordinary eye or sun glasses are NOT safety glasses. 3. Make sure cord is clear of wheels and cutting discs. Do not wrap cord around your arm or wrist.

  • Page 9: Stopping The Equipment

    Rhino RXL1000 machine operation continued Use the knob, located on the top of the handle control box to adjust speed of equipment. Before starting the equipment, ensure that the speed is set to the lowest speed available as displayed on the VFD screen.

  • Page 10: Maintenance

    Rhino RXL1000 maintenance Maintenance: General: - Always plug in battery charging cord when the machine is not in use. When leaving the machine over- night on a job it can be left plugged in to line power, which will charge the batteries. The 110 volt battery charging cable can be disconnected and plugged into a 110v cord when not using line power to charge.

  • Page 11: Vfd Error Codes

    Rhino RXL1000 vfd error codes ERROR CODE DESCRIPTION CLASSIFICATION REMEDY BLOCKING TIME [S] RESET POSSIBLE 2250 CiA: Fault • Check motor and wiring for short circuit. Continuous overcurrent • Check brake resistor and wiring. (inside the device) • Check motor circuit (delta connection, star connection).
  • Page 12 Rhino RXL1000 vfd error codes continued ERROR CODE DESCRIPTION CLASSIFICATION REMEDY BLOCKING TIME [S] RESET POSSIBLE 3221 Warning: Warning • Check mains voltage. DC bus undervoltage • Check fuses. • Check DC bus voltage. • Check mains settings. 3222 DC bus voltage too low Warning •...
  • Page 13 Rhino RXL1000 vfd error codes continued ERROR CODE DESCRIPTION CLASSIFICATION REMEDY BLOCKING TIME [S] RESET POSSIBLE FF06 • Adapt the maximum motor speed (P322.00) and Motor overspeed Fault the error threshold (P350.01). FF36 Warning: Brake resis- Warning • Check drive sizing.

  • Page 14: Vfd Error Screens

    NewGrind Inc. will, at its option, repair or replace, at the NewGrind Inc. factory or at a point designated by NewGrind Inc. any part which shall appear to the satisfaction of NewGrind Inc. inspection to have been defective in material or workmanship.

  • Page 15: Force Majeure

    NewGrind Inc. will not in any event be liable to the user, any successors in interest or any beneficiary or assignee relating to this sale for any consequential, incidental, indirect, special or punitive damages arising...

  • Page 16: Terms & Conditions

    Purchaser and shall be repaid to Seller. 2. PAYMENT TERMS Payment terms are as follows: NewGrind Inc. Machines - Payment prior to delivery. *All past due accounts are subject to a late payment fee of 1.5% per month or a maximum allowed by law if different, along with the expenses incidental to collection including reasonable attorney’s fees and costs.

  • Page 17: Agreements

    Rhino RXL1000 terms & Conditions continued 6. PRODUCTS ORDERED IN ERROR Products may be returned, provided that claim is made, and Seller is notified within 7 days of receipt of Products, and the Products are in original buyer’s possession not more than 30 days prior to return, subject to Seller’s approval.

This manual is also suitable for:

X4c20200c

Table of Contents