Ei Electronics Ei207 Series Instruction Manual page 13

an apparatus in such situations, the two most important considerations when selecting an
appropriate location are:
• not mounting the apparatus directly above a source of heat or steam; and
• mounting the apparatus at a distance of 1m - 3m from the nearest edge of the potential
source of CO.
2.1.c Unsuitable Locations
Do not place the CO Alarm in any of the following areas.
(1) In the immediate vicinity of a cooking appliance (keep it at least 1 metre horizontally
from it).
(2) Outside the building.
(3) In an enclosed space (e.g. in or below a cupboard).
(4) In a damp or humid area. If, however, there is a fuel burning appliance in e.g. the
bathroom, then an apparatus suitable for humid rooms should be installed
(5) Directly above a sink or cooker.
(6) Next to a door, window, air vent or anywhere that it would be affected by draughts.
(7) Next to an extractor fan.
(8) Over heat sources such as radiators or hot air vents.
(9) Where it would be obstructed, e.g. by curtains or furniture.
(10) In an area where the temperature could drop below -10°C or rise above 40°C.
(11) Where dirt or dust could block the sensor.
(12) Where it could be easily knocked or damaged, or where it could be accidentally turned
off or removed.
13
1
.