Advertisement
Step 3
Attach the enclosed Rechargeable Battery Pack using its 'Snap-On' system with the
mounted plastic bracket.
Step 4
Connect the cable plug of the Rechargeable Battery Pack to the cable plug from the
reclining motor. Secure the cable leading to the battery charger by using a cable tie.
Please maintain a distance of approx. 7 cm (2.75 inch) from the frame corner.
Step 5
Return the chair to its standing position. Gently attach the back by placing the metal
posts into the sleeves located at the rear on both sides of the chair. Once slid into the
correct position you will feel and hear a 'click' the lock engages. You can check this lock
by lifting the back. Please be careful not to damage the leather or fabric when joining
the back and seat. Attach the rear Velcro flap (skirt) again as indicated.
Advertisement
