Download Print this page

Urban Barn Paramount Power Recliner Assembly Instructions

Download this manual

Paramount Power Recliner

Assembly Instructions

Power components

X1 Battery pack

Step 1

Please protect your floor and recliner by placing a blanket on the floor before turning

the chair base upside down to gain access to the mechanism. You will notice a steel

support pre-installed on the lower part of the back chair frame.

Step 2

Attach 1 out of the 2 enclosed plastic bracket to the steel support using the 2 supplied

nuts & bolts. The 2

X1 Power cord

X1 battery charger

plastic bracket is to be used as spare.

X2 Nuts and Bolts

X2 Plastic bracket

Page 1 Paramount Power Recliner Assembly Instructions Power components X1 Power cord X2 Nuts and Bolts X2 Plastic bracket X1 Battery pack X1 battery charger Step 1 Please protect your floor and recliner by placing a blanket on the floor before turning the chair base upside down to gain access to the mechanism.
Page 2 Step 3 Attach the enclosed Rechargeable Battery Pack using its ‘Snap-On’ system with the mounted plastic bracket. Step 4 Connect the cable plug of the Rechargeable Battery Pack to the cable plug from the reclining motor. Secure the cable leading to the battery charger by using a cable tie. Please maintain a distance of approx.
Page 3 Instruction for rechargeable power pack The battery capacity is delivered with about 75% charge, please fully charge before using. The standard charging time is 3-6 hours. 2. This product must be matched with the li-ion charger provided. Only a certified technician should attempt to service the charger and battery.