Skil MS6305-00 Owner's Manual page 21

To install the blade:
NOTICE:
NOTICE:
WARNING
plate screws may interfere with and hang
up lower blade guard. Never use saw
without cover plate securely in place. Lower
guard will not function properly.
WARNING
into the blade slot and check for any contact with the base or turntable structure. If the
blade contacts base or table, seek authorized service.
WARNING
Using carbide-tipped blades
Tighten the cover plate
screws. Loose cover
After installing a new blade, make sure the blade does not interfere
with the table insert at 0° and 45° bevel positions. Lower the blade
Make sure that the spindle-lock button is not engaged before
reconnecting the saw to a power source.
Fig. 9
Fig. 10
21