CD-ROM. Before you can read the file, please download the free software Acrobat Reader from our website www.rollei.de, English, Service, download. GETTING TO KNOW YOUR CAMERA Front View 1.
Mode Dial Mode Playback Mode Record Mode Manual Record Mode Setup Mode Movie Mode 1. Playback Mode 2. Record Mode 3. Manual Record Mode 4. Setup Mode 5. Movie Mode Description Select this mode to play back your images and video clips.
GETTING STARTED Installing the Batteries 1. Make sure the camera is turned off. 2. Slide the battery cover. 3. Insert the batteries, noting correct polarity (+ or -). 4. Close the battery cover firmly. Attaching the Camera Strap To prevent accidental dropping of the camera, always use the camera strap.
Inserting an SD Memory Card (optional accessory) 1. Make sure the camera is turned off. 2. Slide the SD memory card cover open. 3. Insert the SD memory card. The front side of the memory card (printed arrow) should face towards the side with the LCD display.
Choosing the Language The provided languages are [ENGLISH], [FRANÇAIS], [DEUTSCH],[ESPAÑOL], [ITALIANO], [ Taking Pictures Using the LCD Monitor 1. Turn the camera on by sliding the switch. 2. Set the mode dial to the Manual Record mode. By default, the LCD monitor is on. 3.
Deleting Images/ Video Clips To delete one image/video clip at a time: 1. Set the mode dial to the Manual Record mode or the Playback mode. In the Record mode or the Record mode, only the last recorded image can be erased. In the Playback mode, select the image that you want to view by using the...
USB drivers. 1. Insert the CD-ROM that came with the camera into the CD-ROM drive. 2. Select and double-click “Digital Camera Driver Installer”. 3. Select “Install Location” and click “Install”.
Step 2: Connecting the Camera to Your Computer 1. Connect one end of the USB cable to an available USB port on your computer. 2. Connect the other end of the USB cable to the USB connector on the camera. 3.
INSTALLING PHOTOSUITE To Install PhotoSuite: 1. Insert the CD-ROM packaged with the camera into the CD-ROM drive. The welcome screen appears. 2. Click “Install PhotoSuite”. Follow the on-screen instructions to complete the installation. INSTALLING PHOTOVISTA To Install PhotoVista: 1. Insert the CD-ROM packaged with the camera into the CD-ROM drive.