Specifications; Operation - Martellato 50BI01 Quick Start Manual

ENGLISH
Thank you for your purchase
For the proper using & maintaining the scale,
please read this instruction completely before operating.
Advice for use and care
· Place the scale on a hard & flat surface to ensure the greatest accuracy and replicability.
· Don't drop or subject the scale to shocks as this may damage the unit.
· Don't use chemical abrasive cleaners.
· Clean the scale with a damp cloth, but don't allow water to enter the unit.
· To ensure the life of the scale, please don't put it in the wet and hot workplaces.
· Please remove the battery from the scale if it has not been used for a long period.
· If it doesn't work when you open the scale, please check the battery and ensure the battery is with
correct polarity. Please check if the battery need to be changed when the scale have been used for a
long time, then try to start it again
· This scale is for family use only and should not be used commercially for any reasons at all.
· Don't store the scale in upright position, only store flat.
· Please ensure no water on the key
· Don't stock on the scale
Due to continuous improvements,
this product is subject to change without notice

Specifications

Equipped with high precision strain gauge sensor system
Unique real-time power indicate as minipacd
Touch panel switch
Tempered safety glass platform
Capacity: 5 kg
Division: 1g/0.05oz /1ml/(1/8cup)
Tare function
Manual on/Auto off Manual off
Units: g/ oz/ ml cup
(ml and cup for water or milk only)
Auto zero resetting
Over-load/ Low power indication
Power: 4x 1.5V AAA batteries
(included)
Switch off
The scale will switch off after press "TARE
" for 2 seconds.
The scale will automatically switch off
after approximate 60 seconds when no

operation.

MODE key:
Premere per cambiare l'unità
Press to change the unit
Presione para cambiar la unidad
(g/oz/ml/cup)
TARE key: On/Off
Tara/Tare
Unit changes
(g/oz/ml/cup)
Press " MODE" once, the unit will be exchanged
from g/ oz/water (ml)/ water (cup) /milk(ml) /
milk(cup).
MI/ Cup Measurement
Put a container on the platform, press "TARE " to clear the weight of container.
Then put water or milk into it, press" MODE"l ml or cup to check the volume.
Operation
Weighing
Step 1: Place the scale on a hard &
flat surface.
Step 2: Press "TARE" once, the LCD
display will show zero.
Step 3: Put the food on the platform,
the weight will be displayed.
Tare function
Step 1: Put the container on the platform, the LCD display will show the weightof the container
Step 2: Press "TARE" to clear the weight of the container (reset to zero).
Then put the food into the container, the LCD display will show the weight of food only.
Repeat press "TARE" to weight more different foods
Step 3: The LCD display will show the negative value of container if you remove the food and con-
tainer from the platform together.
Please press "TARE"again, the display will show zero in 2 seconds.
Please note
If tare the weight which more than 100g, it will show
If tare the weight which more than 100g, it will show