Table of Contents
Advertisement
Meat thermometer
en
Setting the timer
The timer runs alongside other settings. You can set it
at any time, even if the appliance has been switched off.
It has its own audible signal so that you can tell whether
it is the timer or a cooking time that has elapsed.
The maximum time that can be set is 23 hours and 59
minutes. Up to 10 minutes, the timer duration can be
set in 30-second increments.Above 10 minutes, the
time increments become longer the higher the value.
The timer duration will start at a different default value,
depending on which button you touch first:
5 minutes if you touch the
you touch the
@
button.
Touch the
v
button until the timer symbol
1.
underlined.
Use the
A
or
@
button to set the timer duration.
2.
After a few seconds, the timer duration will start to
count down.
If the set timer duration is the duration for which
Tip:
you wish to cook your food, use the cooking time. The
appliance will then switch off automatically when it has
finished cooking.
The timer duration has elapsed
An audible signal will sound. The timer duration will be
zero on the display.
Touch any button to switch off the timer.
Changing and cancelling
You can use the
or
A
@
duration at any time. After a few seconds, the change
will be applied.
To cancel, use the
button to reset the timer duration
A
all the way to zero. The timer is now switched off.
Checking time-setting options
If time-setting options have been set, the corresponding
symbols are lit up on the display. The symbol for which
the time is currently being displayed will be indicated.
To check the values for the different time-setting
options, touch the
button repeatedly until the
v
required symbol is indicated.
Setting the time
Once the appliance has been connected to the mains
or following a power failure, the clock will flash on the
display. Set the time.
The function selector must be set to the "Off" position.
Use the
or
button to set the time.
A
@
1.
The time will stop flashing.
Confirm by pressing the
2.
The appliance will apply the time you have set.
You can go to the basic settings to specify
Note:
whether or not the time should be shown on the display.
~ "Basic settings" on page 26
32
button and 10 minutes if
A
t
button to change the timer
button.
v
Changing the time
You can change the time again when you need to, e.g.
from summer to winter time.
To do this, when the appliance is switched off, touch the
button until the symbol for the time is underlined,
v
and use the
@Meat thermometer
T he meat thermometer makes precise cooking
M e a t t h e r m o m e t e r
possible. It measures the temperature inside the food.
Once the set temperature has been reached, the
is
appliance automatically switches itself off.
Types of heating
Not all types of heating are suitable for operation with
the meat probe.
Suitable heating functions include:
3D hot air
<
■
6
Hot air gentle
■
Pizza setting
$
■
Convection grilling
7
■
Top/bottom heating
%
■
If the meat probe is being used and you select an
Note:
unsuitable type of heating, a signal will sound.
Temperature
The meat probe measures the internal temperature of
the food between 30 °C and 99 °C. You can set the
core temperature you require on the display.
You can set the temperature of the cooking
compartment as normal using the temperature selector.
To avoid damaging the meat thermometer, do not set
temperatures higher than 250 °C.
The cooking compartment temperature set must be at
least 10 °C higher than the core temperature set.
Inserting the meat probe into the food
Insert the meat probe into the food before placing your
dish in the cooking compartment.
Use only the meat probe supplied. You can purchase
one as a spare part from our after-sales service.
:
Warning – Risk of electric shock!
The insulation of an incompatible meat thermometer
may be damaged. Only use the meat thermometer
which is recommended for this appliance.
or
button to change the time.
A
@
Advertisement
Table of Contents
