Step 1; Step 2 - modway Motivate Channel EEI-3333 Assembly Instructions

EEI – 3333 / 3334

STEP 1:

Please put Chair Back (1) upside down on a carpeted or padded area.
Then open the black fabric which is attached by the Velcro from back to front on the bottom of the Seat Frame (2). The
inside of the Seat Frame (2) will now be visible.
Attach Seat Frame (2) to Chair Back (1) by using 2 pieces of Bolt (A), 2 pieces of Spring Washer (D) and 2 pieces of Flat
Washer (E) as shown.
Do not fully tighten Bolt (A) at this step.
A x 2 D x 2

STEP 2:

Attach Seat Frame (2) to Chair Back (1) by 4 pieces of Bolt (C), 4 pieces of Spring Washer (D) and 4 pieces of Flat Washer
(E) as shown.
Do not fully tighten Bolts (C) at this step also.
C x 4 D x 4
Customer Service 908-368-1025︱www.modwayfurniture.com
DINING CHAIR
A
D
E
E x 2
C
D
E
E x 4
2
1
2
1
Hardware & Tool required
Hardware & Tool required
Page 2 of 4