JVC EXAD KW-AVX900 Instructions Manual page 81

A
Installing the TV aerials
Before installing:
• Attach the aerials only to the inside of the front window glass
(so as not to obstruct your visibility through the window).
• Do not rub the aerials or the aerials' cords with alcohol,
benzine, thinner, gasoline or other volatile substances.
• Be sure to wipe the window surface where the aerials will be
attached with the cleaner (supplied) to remove moisture, dirt,
dust, wax, oil or other substances.
• The windows with windshield heating, wave insulated, or
thermally insulated screen will interfere with signal reception.
Consult your JVC car audio dealer.
• For connecting the TV aerials to the unit, see page 2.
Attaching the TV aerials
Before attaching:
• Identify the exact attachment location and confirm that the
aerials will not interfere with other aerial receptions (at least
10 cm away from the other aerials). Once you attach the aerials,
you can hardly remove them.
1
Attach the aerials on the front windshield.
• Rub on the aerials with the rubber spatula (supplied) to firmly
fix them on the glass.
2
Attach the aerial cords to the electrodes of the aerials.
3
Wire the cords along the pillars, and secure them using the cord
clamps.
• Remove the pillar covers, and wire the cords so that the earth
section of the cord can touch the metallic part of the car.
4
After wiring is done, attach the pillar covers.
B
Connecting the parking brake lead
Connect the parking brake lead to the parking brake system built in the car.
Parking brake
A
Connecting the AV I/O cord
CAMERA IN
2nd AUDIO OUT
VIDEO OUT
LINE IN
VIDEO IN
REVERSE
* 3 Required only when connecting a rear view camera to CAMERA IN plug.
Instal_KW-AVX900[A]_1.indd 3 Instal_KW-AVX900[A]_1.indd 3
All manuals and user guides at all-guides.com
TV aerial (Left)
Aerial cords
• Aerial cords are
identical both for
the left and right TV
aerials.
1
2
Parking brake switch (inside the car)
L
R
L
R
GEAR
SIGNAL
Audio/video cords (not supplied)
Reverse gear signal extension cord *
Reverse lamp lead
White
Crimp connector
Video cord (not supplied)
To rear view camera
L
R
L
R
3
REVERSE
GEAR
SIGNAL
Crimp connector
To car battery
3
Red
3
Parking brake lead (light green)
To metallic body or chassis of the car
2nd monitor (KV-MR9010, etc.)
Cordless headphones (KS-HP2)
Navigation System or playback source
Reverse lamp
To reverse lamp
TV aerial (Right)
Aerial cords
Clamps
Earth tape
2007.3.14 5:12:51 PM 2007.3.14 5:12:51 PM