JVC EXAD KW-AVX900 Instructions Manual page 58

Menu items
IF Band Width
TV Channel Area
9
AV Input*
10
Camera Input*
* 9
Not selectable when "AV-IN" is selected as the source.
* 10
Reverse lamp lead connection is required. See Installation/Connection Manual (separate volume). The rear view
through the camera appears on the monitor in <Full> aspect ratio (regardless of the aspect ratio setting) when you
shift the gear to the reverse (R) position. When you press DISP on the control panel, or when you shift the gear to
another position other than the reverse (R) position, the rear view screen is cleared.
All manuals and user guides at all-guides.com
Selectable settings, [reference page]
Auto: Increases the tuner selectivity to reduce interference noises
between adjacent stations. (Stereo effect may be lost.)
Wide: Subject to the interference from adjacent stations, but sound
quality will not be degraded and the stereo effect will remain.
Select the place where you use this unit.
Australia: Select when in Australia.
New Zealand: Select when in New Zealand.
Indonesia: Select when in Indonesia.
CCIR: Normally select this.
You can determine the use of LINE IN and VIDEO IN plugs.
Off: Select when no component is connected ("AV-IN" is skipped while
selecting the source).
Audio&video: Select when connecting an AV component such as a
VCR. [48]
Audio: Select when connecting an audio component such as a digital
audio player. [48]
Navigation : Select when connecting a Navigation System. [49]
Off: Select when no rear view camera is connected to the CAMERA IN
plug.
Normal: Select when connecting the rear view camera to the CAMERA
IN plug. The picture from the camera is displayed as it is taken.
Mirror: The mirror image of the picture taken by the camera is
displayed on the monitor.
• While the pictures through the camera are shown on the monitor, no
message will be displayed.
58