Roland VariOS User Manual page 12

Screen reference
KBD (Keyboard)
Parameter Value
VELO SENS -63–+63
OSC1/2 (Oscillator)
Parameter Value
DETAIL —
WAVEFORM SAW,
SQR,
TRI,
SINE,
RAMP,
JUNO,
HQ-SAW,
HQ-SQR,
NOISE
LEVEL 0–127
IMPACT 0.0–4.0
COARSE TUNE -48–+48
FINE TUNE -50–+50
PW -63–+63
SUB OSC 0–127
12
Description
Set this when you want the amount of the envelope to change depending on the force with which you
press the keys. Set this to a positive (+) value to have the changes in envelope amount increase the
more forcefully the keys are played; to make the envelope play more softly as you play harder, set
this to a negative (-) value.
Description
When you click the Detail button, the OSC1 or OSC2 dialog box will open.
Here you can make more detailed settings. -> p. 17
Selects the wave upon which the sound is to be based when using an analog oscillator.
Waveform
SAW: Sawtooth wave
SQR: Square wave
TRI: Triangle wave
SINE: Sine wave
RAMP: Ramp wave
JUNO: Modulated sawtooth wave
HQ-SAW: High quality sawtooth wave
HQ-SQR: High quality square wave
NOISE: Noise wave
Specifies the volume of the oscillator.
Specifies the sharpness of the attack of the analog oscillator. Higher settings will produce a
sharper attack.
Adjusts the pitch of the oscillator up or down in semitone steps (+/-4 octaves).
Adjusts the pitch of the oscillator up or down in 1-cent steps (+/-50 cents).
* One cent is 1/100th of a semitone.
Specifies the amount by which the wave shape will be modified.
Emphasizes the low-frequency region of the sound.
PW SUB OSC
O O
O O
O O
O O
O O
O O
X X
O X
O X
O: effective X: ineffective