Table of Contents
Advertisement
9.1 Position the cookware according to
weight and size
Position the cookware in the middle over the rear part
of the flexible cooking zone and its extension.
Depending on the size of the cookware and the
covered cooking surface, you can switch on the flexible
cooking zone as two separate cooking zones or as one
connected cooking zone:
10 powerMove Plus
You can use this function to change the power level of
an item of cookware by simply sliding it forwards or
backwards in the flexible cooking zone. The zone is di-
vided into three areas with different power levels.
10.1 Positioning and moving the cookware
Only use one item of cookware. The cooking area de-
pends on the cookware used, as well as its size and
positioning.
Each cooking area has a preset power level:
¡ Front area = power level
¡ Middle area = power level
¡ Rear area = power level .
You can change the standard setting of the preset
power levels. You can find out how to do this in the
"Basic settings" section → Page 16.
9.2 Activating flexInduction Plus
1.
Place the cookware on the flexible cooking zone so
that it covers the extension.
2.
Select the cooking zone and the power level. The
displays for the cooking zone and for the exten-
ded zone light up.
a The zone is activated.
Note: If the display does not light up, lift the cookware
and place it back on the cooking zone.
9.3 Deactivating flexInduction Plus
▶
Select the cooking zone and set it to in the set-
tings range.
a The function has been deactivated.
10.2 Activating powerMove Plus
Requirement: Only place one item of cookware on a
flexible zone.
1.
Select one of the two cooking zones in the flexible
zone.
2.
Press .
lights up brighter and the power level for the area
a
in which the container is located lights up.
a The function is switched on.
Note: You can change the power levels during cook-
ing.
10.3 Deactivating powerMove Plus
▶
Touching
lights up dimly.
a
a The function has been deactivated.
powerMove Plus en
11
Advertisement
Table of Contents
