Operation - Kaysun COMPAK KHP-15/190 ACS2 Owners & Installation Manual

5. OPERATION

5.1 Control Panel Explanation
5.2 Display Explanation
①
12
13
14
15
④ ⑤
Table.5-1
No Icon Description
will be lightened if screen is unlocked.
It shows water temperature on normal;
① It shows remaining vacation days on vacation;
It shows setting temperature on setting;
It shows unit setting/running parameters,
error/protection code on querying.
Time and clock setting
②
Whenever there is any setting for clock,
SET TIME will be lightened.
There are six timers can be set.
If anyone of them has been set, this icon
will lighten the corresponding one when
screen is unlocked；
If there is none of timers has been set, it will
3
keep extinguished.
If timer is being set, this icon will flash the
corresponding one with 2Hz frequency as
well lighten the timer which has been set.
Operation
②
17 19 18
⑥ ⑦ 16 ⑧ ⑨
shows the clock.
No Icon
4
5
6
7
Display
8
9
10
11
Fig.5-1
12
③
13
14
⑩
11
15
Fig.5-2
16
17
18
19
20
12
Description
Reserved
will be lightened when the machine is disinfecting.
Compressor:
will be lightened when compressor is
running, otherwise will be extinguished.
Lock:
If button is locked, will be lightened,
otherwise will be extinguished.
Solar:
will be lightened when the machine is connected
to the solar signal or connected with the solar water
pump.
E-heat:
will be lightened when E-heat is running,
otherwise will be extinguished.
High temp. Alarm
If water temp is higher than 50℃，
will be lightened, otherwise
extinguished.
Error:
will be lightened when unit is under
protection/error .
VACATION MODE:
will be lightened when the machine is running in
VACATION mode.
The default initial vacation days of vacation mode are
14 days, And you can adjust the days from 1 to 360.
The button is disinfected after the holiday.
HYBRID MODE:
will be lightened when the machine is running in
HYBRID mode.
E-HEAT MODE:
will be lightened when the machine is running in
E-HEAT mode.
ECONOMY MODE:
will be lightened when the machine is running in
ECONOMY mode.
When any key is invalid, this icon will flash once.
The icon lights up when the water temperature is
being set.
The icon lights up when the clock is being set.
WIFI:
will be lightened when WiFi is connected;
will be extinguished when WiFi is not
connected;
will flash with 2Hz frequency when setting
WiFi.
OPTIONAL:
Press and hold three keys
time for 3 seconds,press
display "C08",press to confirm the FAN function.
Then press or to choose the fan speed you
need:the screen will display 00,01,02,03.(00 means stop
the FAN function.01 means "LOW fan speed".02 means
"Medium fan speed" and 03 means "High fan speed".If
displayed "--" indicates that this FAN function is not
supported) Finally,press
will be
at the same
or until the screen
to confirm.