Driving In Reverse; Stopping The Engine And Parking The Vehicle - Polaris General 1000 2023 Owner's Manual

DRIVING IN REVERSE

Before shifting into reverse, use extra care to make sure the area is clear of
people or obstacles. When it's safe to proceed, back slowly.
Follow these precautions when operating in reverse:
1. Always check for obstacles or people behind the vehicle.
2. Apply the throttle lightly. Never open the throttle suddenly.
3. Back slowly.
4. Apply the brakes lightly for stopping.
5. Avoid making sharp turns.
STOPPING THE ENGINE AND PARKING THE
VEHICLE
When leaving the vehicle on an incline is unavoidable, use extra care. Vehicle
rollaway can cause serious injury or death. This vehicle can roll whenever the
gear selector is not in the PARK (P) position. Always shift to PARK (P) when
stopping the engine or leaving the vehicle. If leaving the vehicle unattended,
block the rear wheels on the downhill side and keep children, pets, and others
To park the vehicle:
1. Stop the vehicle on a level surface. When parking inside a garage or other
structure, be sure that the structure is well ventilated and that the vehicle is
not close to any source of flame or sparks, including any appliance with a
pilot light.
2. Place the transmission in PARK (P).
3. Turn the engine off..
4. Engage the park brake (if equipped).
5. Slowly release the brake pedal and make sure the transmission is in PARK
before exiting the vehicle.
6. Remove the ignition key to prevent unauthorized use.
WARNING
WARNING
away from the gear selector.
OPERATION
73