Advertisement
2. Commissioning
2.1 Connection and location of the pellet mill
WARNING: Disconnect all power supply before any maintenance.
2.1.1 Connection
Type: KL225 7.5KW/380V: 17.5A
Type: KL295 15KW/380V: 32A
Check and tighten all screws and cables to the control unit as before the main power cable is mounted.
Failure to observe this will result in damage to the control unit. After successful connection of the pellet mill,
first test the rotation of the roller. The rotation direction of the roller must be matching with the direction arrow.
Make sure all these setting must be operated by a qualified person.
Warning: Power connections must be operated by a qualified electrician.
2.1.2 Location
Place the machine under a solid, safe and well-dry location. Keep the machine away from unauthorized
person
Do not operate the machine under the temperature of 10 °C.
Before use make sure all bolts and nuts are securely tightened.
Advertisement
