Advertisement
Functioning
The pellet press is fixed with an engine with a power of RP-driven all kinds of different power. Via a drive shaft
and the die roller wheels are caused to rotate. The starting material for the production of pellets, for example,
sawdust is pressed by the wheels roller in the matrix. Due to the pressure and friction in the die, the starting
material is heated to a temperature of 60-80 ° C. As a result of pressure and temperature increase, the
material connects to compressed pellets and will have a high strength after cooling. Depending on the
material to be pressed, additional binder needs to be added. The diameter of the pellets is determined by the
hole diameter of the die. Matrices can be ordered with the following hole diameters: 2.5mm, 4mm, 6mm,
8mm.
TOOLS
1. Wheels
2. Allen keys
3. Wrench
4-6. Grease gun
Check whether all tools which come with the pellet mill.
Keep tools for future use.
Lubricate machine periodically.
Advertisement
