Table of Contents
Advertisement
Start Up Your DiskStation
1 Push the button on the adapter provided in the package and pull out the plug case as illustrated below.
2 Slide the plug adapter provided into the slots by pushing it downward. Note that the plug adapter that comes
with your DiskStation varies depending on your region. The image below is for reference only.
3 Connect one end of the AC power adapter to the power port of the DiskStation. Connect the other end to a
power outlet.
4 Use the LAN cable to connect the DiskStation to your switch, router, or hub.
5 Press the power button to turn on the DiskStation.
Congratulations! Your DiskStation is now online and detectable from a network computer.
8 Chapter 2: Hardware Setup
Advertisement
Table of Contents
