Table of Contents
Advertisement
Chapter 3 BIOS Setup
Halt On: During the power-on-self-test (POST), the computer stops if the BIOS detect a hardware error. You
can tell the BIOS to ignore certain errors POST and continue the boot-up process. These are the selections:
All errors
No errors
All, But Keyboard
All, But Diskette
All, But Disk/Key
26
The system boot will be stopped for any error that may be detected.
Whenever the BIOS detects a non-fatal error the system will not be
stopped and you will be prompted
The system boot will not stop for a keyboard error; it will stop for all
Other errors.
The system boot will not stop for a disk error; it will stop for all other
Errors.
The system boot will not stop for a keyboard or disk error; it will stop
for all other errors.
User's Manual
Advertisement
Table of Contents
