Hyundai HPVB20VSP-2B2A-1 Original Instructions Manual page 6

Table of Contents

Advertisement

Lpa sound pressure level............................................ 86,9 dB(A)
Uncertainty.KpA...........................................................3 dB
Lwa sound power level................................................ 97,9 dB(A)
Uncertainty K...............................................................3 dB
Wear ear-muffs
The impact of noise can cause damage to hearing.
Total vibration values (vector sum of three directions) determined in accordance with
EN62841:
Impact drilling: 8,690 m/s² K= 1,5 m/s²
-
Drilling: 1,480 m/s² K= 1,5 m/s²
-
▶ Only use tools which are in perfect working order
▶ Service and clean the appliance regularly
▶ Adapt your working style to suit the appliance
▶ Do not overload the appliance
▶ Have the appliance serviced whenever necessary
▶ Switch the appliance off when it is not in use
▶ Wear protective gloves
Information:
The declared vibration total value has been measured in accordance with a standard test
method and may be used for comparing one tool with another;
The declared vibration total value may also be used in a preliminary assessment of
exposure.
Warning:
That the vibration emission during actual use of the power tool can differ from the declared
total value depending on the ways in which the tool is used; and
of the need to identify safety measures to protect the operator that are based on an
estimation of exposure in the actual conditions of use (taking account of all parts of the
operating cycle such as the times when the tool is switched off and when it is running idle in
addition to the trigger time).
Wear hearing protection.
Residual risks
Even if you use this electric power tool in accordance with instructions, certain residual risks
can- not be rules out. The following hazards may arise in connection with the equipment's
construction and layout:
Lung damage if no suitable protective dust mask is used.
Damage to hearing if no suitable ear protection is used.
Health damage caused by hand-arm vibrations if the equipment is used over a prolonged
period or is not properly guided and maintained

Advertisement

Table of Contents
loading

Table of Contents