Table of Contents
Advertisement
2) Safety instructions when using long drill bits
a) Never operate at higher speed than the maximum speed rating of the
drill bit. At higher speeds, the bit is likely to bend if allowed to rotate freely
without contacting the workpiece, resulting in personal injury.
b) Always start drilling at low speed and with the bit tip in contact with
the workpiece. At higher speeds, the bit is likely to bend if allowed to rotate
freely without contacting the workpiece, resulting in personal injury.
c) Apply pressure only in direct line with the bit and do not apply
excessive pressure. Bits can bend causing breakage or loss of control,
resulting in personal injury.
Instructions additionnelles
-The charger and the battery are sold separately. Please buy the battery and
recommended charger.
-The electric current used must match the specifications of the battery charger;
-Read the instructions and technical specifications of the charger and drums.
-Never allow moisture, rain or splashes to reach the location of refill.
-The ambient temperature should never exceed 40ºC (temperature range: 5-
40ºC) when using the product, charging the battery and storing.
-A defective or damaged battery or no longer accepting charge must be
eliminated in a special collection point. -Respect the environment. Do not
throw a battery unusable with garbage in the fire or in the water.
-Keep the charger surface free of dust and dirt.
-Always remove the battery before performing any operation or maintenance
on the device
-Do not recharge non-rechargeable batteries.
PROPER USE
The cordless drill/screwdriver is designed for tightening and undoing screws, as well as for
drilling in wood, metal and plastic.
The equipment is to be used only for its prescribed purpose. Any other use is deemed to be
a case of misuse. The user / operator and not the manufacturer will be liable for any
damage or injuries of any kind caused as a result of this.
Please note that our equipment has not been designed for use in commercial, trade or
industrial applications. Our warranty will be voided if the machine is used in commercial,
trade or industrial businesses or for equivalent purposes.
TECHNICAL DATA
Voltage: 20Vd.c.
-
Idling speed: 0-450/0-2000 min-¹
-
Battery Capacity: 2000 mAh
-
Battery Type: Li-Ion
-
Chuck Size: 13 mm
-
Charging time: 1h
-
Advertisement
Table of Contents
