hillvert HT-WP-43A User Manual page 24

g) To ensure the designed operational integrity of the device, do not remove
factory-installed covers or loosen screws.
h) When transporting or moving the device from storage to the place of use,
observe the health and safety rules for manual handling applicable in the
country where the device is used.
i) Avoid situations in which the device stops under heavy loads during operation.
This can cause overheating of the drive elements and consequent damage to
the equipment.
j) Do not move, shift, or rotate the device while in operation.
k) Do not leave the device switched on unattended.
l) Clean the device regularly to prevent permanent dirt build-up.
m) The provided value of vibration emission is measured according to the
standard measurement methods. The value of vibration emission may change
if the unit is used under different environmental conditions.
n) Before each use, make sure that the nozzle is properly mounted in the machine
and that the hose is properly attached and undamaged.
o) Do not obstruct the air inlet or outlet.
p) The product is not a toy. Cleaning and maintenance must not be performed by
children without adult supervision.
q) Do not start up an empty unit.
r) Do not tamper with the device to alter its performance or design.
s) Keep the unit away from sources of fire and heat.
t) Do not overload the device.
u) Do not block the ventilation openings of the unit!
v) It is forbidden to use the device to pump contaminated water (e.g. with oil,
particles, abrasive solids, etc.).
w) Use of the pump to pump saltwater, corrosive substances, flammable liquids,
etc is prohibited.
x) Add oil to the proper level before turning on the machine. If the oil level is too
low the engine will not start or may shut down.
y) Report any leakage of operating oils from the machine to the relevant
authorities or comply with the legal requirements in your area of use.
z) Danger! Health hazard and risk of explosion of the combustion engine.
aa) The engine exhausts contain poisonous carbon monoxide. Remaining in an
environment containing carbon monoxide can lead to unconsciousness or
even death. Do not run the engine in an enclosed area.
bb) Keep the engine away from heat, sparks, and flame. Do not smoke near the
machine!
cc) Gasoline is flammable and explosive. Stop the engine and let it cool down
before refueling.
dd) Caution! Wrong fuel may cause damage to the engine.