Roland Sound Canvas Digital SC-D70 Owner's Manual page 45

Roland sc-d70 sound canvas: owners manual
Table of Contents

Advertisement

A MIDI sound generator connected to the SC-D700 cannot be
played from your sequencer software
• Performance data received by the SC-D70's USB connector will be
transmitted from the MIDI OUT connector if the track output is set to
MIDI OUT.
Make the correct settings in your sequencer software, and for the various drivers.
Can't apply Delay to a drum part
• By default, the delay send levels are set to 0 for all drum instruments.
Set the delay send level for each instrument.
Since the delay level for the drum part is also 0 by default, you must raise the
delay send level.
When you turn the insertion effect ON, the previously specified
system effects (e.g., reverb) are all initialized.
• When you turn the insertion effect ON, it is no longer possible to use
Control Changes to set the send level of the system effects.
For this reason when you turn on the insertion effect, you must use a different
route to set the system effect sends.
You can use the EFX SEND LEVEL TO REVERB/CHORUS/DELAY System
Exclusive message to set the send level to the system effects (common to the
signal after the insertion effect) when EFX is ON.
Is there a way to initialize automatically at each startup?
• When the power is turned on, the SC-D70 will start up in a GS Reset
condition.
• By using an exclusive message to send a GS Reset at the beginning of
the song, you can cause a reset to occur at the beginning of the song.
Since a bulk dump involves a large amount of data,
is there a way to transmit only the data for individual parameters
to the PC (sequencer)?
• In addition to bulk dump which transmits a given collection of parameters
together, the SC-D70 is able to transmit individual data for separate
parameters. You can try using this individual data.
Individual data can be created efficiently, since you do not have to look up
System Exclusive data items one by one.
Appendix
Insertion effect
"Appendix" in the
accompanying CD-ROM
EFX SEND LEVEL TO
"Appendix" in
REVERB
the accompanying CD-
ROM
"Appendix"
Bulk dump
in the accompanying CD-
ROM
Individual data
"Appendix" in the
accompanying CD-ROM
45

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents