Yamaha XMAX YP250R 2013 Owner's Manual page 56

PERIODIC MAINTENANCE AND ADJUSTMENT
1
2
ZAUM1047
1. Panel B
2. Screw
To install the panel
6
Place the panel in the original position,
and then install the screw.
Panel C
To remove the panel
1. Remove the quick fastener, and
then pull the under cowling off as
shown.
TIP
The quick fastener is removed by
pushing the center pin in with a screw-
driver, and then pulling the fastener
out.
1
2
ZAUM1042
1. Cowling
2. Quick fastener (after removal)
2. Remove the cowling screws, and
then pull it off.
1
2
1
ZAUM1043
1. Screw
2. Cowling
3. Remove the battery bracket bolts,
and then pull it off.
6-9
4. Remove the battery bracket and
panel assembly by pulling it off as
shown.
3
1
2
ZAUM1045
1. Panel C
2. Bracket
3. Bolt
To install the panel
1. Place the battery bracket and
panel assembly in the original po-
sition, and then install the bolts.
2. Place the cowling in the original
position, and then install the
screws.
3. Place the under cowling in the
original position, and then install
the quick fastener.
3