Olivetti d-Copia 283MF Plus Operation Manual page 48

FAX Operation (Basic)
FAX Detail:
TX Start Speed:
33600bps
TX Start Speed
ECM
Group Registration
You can register several destinations that have been registered to be contacted as a unit. This method is
convenient because several destinations can be designated at one time. Up to 20 groups can be registered.
3-18
C b
3/ 4
[ Change ]
Key
To change the transmission start speed, press
this key. Select the speed from 33,600 bps,
14,400 bps, and 9,600 bps.
ECM (error correction mode) is a function to
automatically resend an image that has not
been correctly sent or received due to the
effects of noise on the telephone line during
transmission. To change the ECM
communication setting, press this key.
NOTE:
Register the encryption key in advance. For
details, refer to Registering an Encryption Key on
page 6-26.
34
Press the or
35
Press the OK key. Proceed to the next step or step
38 when [On] or [Off] is selected in step 34,
respectively.
36
Use the numeric keys to enter the encryption box
number (4 digits).
37
Press the OK key.
38
Use the or key to select [TX Start Speed] or
[ECM] and change settings as necessary, and then
press the OK key.
Description
39
Use the or key to check if each item was
entered correctly.
40
Press the OK key.
41
Press the OK key again.
42
Use the or key to check if the destination was
set correctly.
43
Press the OK key. The destination is added to the
Address Book.
key to select [On] or [Off].
OPERATION GUIDE