Chapter 4 Other Functions; Copying Patches; Exchanging Patches - Roland GR-20 Owner's Manual

Chapter 4 Other Functions

Copying Patches

Here's how you can copy patch settings. You can copy only
to the USER bank.
1. Select the copy-source patch (the patch you want to copy
from).
2. Press the [WRITE] button.
The BANK indicator will change to USER, and the
display will blink.
fig.4-01(COPY)
3. Use the [NUMBER/VALUE] knob to select the copy-
destination patch number (patch number you want to
copy to).
4. Press the [WRITE] button once again.
The setting will be copied to the copy-destination patch.
* The decimal point in the display will blink while copying the
setting.
* Use caution, since the settings previously stored in the copy-
destination patch will be overwritten and lost.

Exchanging Patches

Here's how you can exchange (swap) patches within the
USER bank. This is a convenient way to arrange USER bank
patches in the desired order.
* This will not work if the selected patch is not in the USER
bank.
1. Select one of the patches that you want to exchange.
2. Hold down the [EXIT] button and press the [WRITE]
button.
The indication in the display starts blinking.
fig.4-02(EXCNG)
3. Use the [NUMBER/VALUE] knob to select the other
patch that you want to exchange.
4. Press the [WRITE] button once again.
The patches will be exchanged.
* The decimal point in the display will blink while the patches is
being exchanged.
25